TrollingMotorPro may earn commission from affiliate links in this article. Learn more.

Pelican Bass Raider is a small pontoon fishing boat. It’s stable and has a weight capacity of 600 pounds.

Although Pelican boats have a good reputation for practicality, there are some issues with them we’re going to cover in this article, including leaking seams and faulty wiring.

In this article, we look at the most common problems with Pelican Bass Raider 10E.

Let’s get started!


Bass Raider 10E – Check Price

Water Collecting Inside

There are complaints that the seams between the boat’s elements are not fully sealed.

Poorly sealed seams in Pelican Bass Raider 10E result in water seeping into the hulls.

That usually happens when the water splashes from the bottom and enters by the rub rails. It can also happen after heavy rain.

Impossible to Fully Drain

Once the water gets in between the two layers, you want to get rid of it.

Even though there is a drain plug on the end of the boat, it is too high and it can be impossible to get all the water out.

Even if you flip the boat, it won’t fully drain. Also, if there is too much water inside already, it can be very difficult to lift the boat.

This is not ideal, especially if your boat spends some time in freezing conditions. Frozen water could damage the boat and cause costly repairs.

Faulty Internal Wiring

It’s great Pelican Bass Raider 10E comes pre-wired so that you can quickly install a trolling motor on them.

Unfortunately, the wiring sometimes fails, as the fuses have tendency to blow. If you’re not ready for it, it can get you in a tricky situation, for example if you find yourself in strong currents and lose power.

The best fix is to check all the connections, as they are responsible for voltage drop and increased current flow. Also, replace the old fuse with a circuit breaker.

Don’t forget to check if the wire gauge can handle the current draw of your trolling motor.

Making Holes Can Void Warranty

Most people will want to mount things on their boat, such as fish finders, rods etc.

Unfortunately, if you make a hole in your boat, it can void your warranty.

Other Issues

Rusty Staples

This seems to be a mostly cosmetic issue, but it’s a shame a higher grade stainless steel is not used on the Pelican Bass Raider 10E.

Not As Durable as Aluminum

The polyethylene used on the Bass Raider is light, but it is simply not as durable as aluminum or fiberglass.

Assembly Hardware Missing

It’s just a poor customer experience when you order your boat and it arrives without any screws or bolts that are necessary to use the boat.

No Instructions Provided

This doesn’t have to be the case for everyone, but many buyers got their boats without any manual or even basic instructions included.

Conclusion

Pelican Bass Raider 10E has a very attractive design at a low price point.

Most of the problems we mentioned are minor. Unfortunately, the water getting inside is a serious one.

We are looking forward to Pelican fixing this issue soon.

Have you experienced any other problems with this boat?

Let us know!